SEEN Safety System products and accessories
SEEN Safety System / Products
The SEEN Safety System enables you to monitor, manage, and mitigate pedestrian-collision risk better than any other system on the market, with less cost and hassle.
The system is comprised of two core products, the patented IRIS 860 sensor, and the IRIS-i camera. Depending on your operating environment and machine type, a variety of accessories may also be needed (see below).
The flagship of the SEEN Safety System, the IRIS 860 sensor uses infrared laser technology to detect reflective tape on high-visibility workwear and markers.
SEEN’s IRIS-i camera accessory captures information about each detection event and uploads it to SEEN Insight, SEEN’s secure online data platform.
IRIS 860 accessories
IRIS 860 Setup Dongle
The IRIS 860 Setup Dongle enables you to change the IRIS 860 sensor settings using SEEN’s free Sensor Setup App. Requires an Android or iOS device with Bluetooth, and a USB-C power bank (not included).
Weather Shield
The weather shield provides the sensor with rain, heat, and UV protection, and is recommended for machines that frequently operate outdoors.
Cab box
A Cab box is needed for closed cab machines where the operator wouldn’t otherwise hear the sensor’s alert. It gives the driver an audible alert inside the cab, and can connect to up to four sensors.
Cab Box Sensor Cable
When a Cab Box is used, a Cab Box Sensor Cable is needed to connect each sensor to the Cab Box. Available in 5, 10, 15 and 20m lengths.
Cable Adapter
The Cable Adapter cable allows the IRIS 860 Setup Dongle to connect to a Cab Box Sensor Cable (allowing the sensor settings to be changed from inside the cab).
Accessory Cable
The Accessory cable outputs the sensor’s detection signal, and can be used to trigger a third-party accessory or system.
Demo Pack
The Demo Pack enables easy demonstration of a SEEN sensor. It includes an IRIS 860 sensor, mounting bracket with magnetic feet, IRIS 860 Setup Dongle, high-viz vest, hex key, 2x cable ties, instructions. Requires a USB power bank (not included).
Buzzer Cap
The Buzzer Cap clips over the sensor buzzer, and is used to reduce the alert volume if necessary.